Vibratory Pipe Rerounders for PVC Deflection Correction

ACP Vibratory Pipe Rerounders for PVC Pipe

8" Rerounder Model 855
10" Rerounder Model 1055

Small Rerounder Model
  • Restores deflected sewer pipes back to within tolerances.
  • Patented efficient vibratory design.
  • Pneumatic vibrator.
  • A powerful high frequency vibration consolidates and stabilizes material around the pipe to keep deflections from returning.

12" Rerounder Model 1255
15" Rerounder Model 1555

Intermediate Rerounder Model
  • Only smooth contoured surfaces come in contact with the pipe.
  • Vibration is transmitted radially. There is no impact force driving the rerounder forward.
  • With vibration doing most of the work, 300 lb. to 2000 lb. of pulling force is usually adequate. In most cases 500 lb. is enough.
  • With this design there should be no damage to the pipe if the sewer line is clean.

Vibration Technology

Vibration Technology
  • The 8 inch through 15 inch rerounders use this heavy duty vibrator assembly.
  • This design has an efficient combination of power, frequency, and amplitude to flow and displace the surrounding bedding material.
  • By flowing granular particles together, the density of the pipe zone material is increased.
  • This same technology has been proven very effective in our sag correction systems.

Ladder Pulley

Ladder Pulley
  • For 8 inch and larger pipe.
  • Billet aluminum rollers with oilite bushings.
  • Wide rollers accommodate pull lines or hoses.

Add-On
Air Swivel / Oiler/ Air Filter

Air Swivel /Oiler/Air Filter
  • The air swivel, oiler, filter, and whip hose assembly connects at the rerounder.
  • Torque from the vibrator causes the rerounder to rotate. The air swivel is necessary to prevent the rotation from twisting and kinking the air hose.

Add-On
Concentric Pullback Swivel

Image
  • Purpose-built for the pullback connection on ACP rerounders. The Concentric Pullback Swivel is used on ACP 8-inch through 15-inch Vibratory Pipe Rerounders as a separate pullback swivel, providing a centered pull point while allowing the tool to rotate freely under load.

Specifications

       
Model 855 1055 1255
Pipe Size 8 in. 10 in. 12 in.
Air Consumption All 3 Models: 70 cfm @ 80-100 psi
Minimum Air Hose Size All 3 Models: 3/4 inch for long lengths
Approximate Weight 64 lb. 81 lb. 102 lb.

Model / Description / Price

8" Rerounder Model 855 10" Rerounder Model 1055
12" Rerounder Model 1255 15" Rerounder Model 1555
Ladder Pulley for 8" and larger pipe Concentric pullback swivel
3/4" Air swivel, in-line oiler, air filter, and whip hose assembly